Prepare the surface, sanding the wood and if necessary fill cracks and fissures with a solvent-based filler like Lega Stucco RS A or a water-based filler like Idrostucco RS/30. The last grit to be used for final sanding is 100-120; we do not advise to use finer abrasive papers which could close the wood pores and reduce its absorption capacity. Accurately clean the surface before applying L’Olio 100%. To obtain a more intense color and improve the softness to the touch of the finish, it is possible, before the impregnation treatment, to wipe the wood surface with a wet cloth to open the pores of the wood (grain popping). Allow the floor to dry before applying L’Olio 100%. The wood must be clean, dry and without any residue of previous treatments. Stir with care L’Olio 100% before use. Apply the product with a spatula or directly with a buffing machine, spread it within 15-20 minutes with a buffing machine and green or red pad. This procedure is very important to uniformly spread the oil and avoid excess of product. After complete drying, usually speaking after 24 hours, proceed to polish the surface with a buffing machine and white pad. One coat is normally enough. It is possible to increase the oil resistance properties adding Oil-Linker cross-linking agent (10%). Colour and drying time remain unchanged. The mix has a pot life of about 8 hours.
Immediately after the application it is possible to apply the water-proofing agent I.R.O to improve hydro-repellence. We recommend to wait at least 20 days after the application before doing any cleaning or maintenance
L’Olio 100% Solvent free hardwax oil for wooden floors L'Olio 100% is a ready to use high solid blend of natural oils and hard waxes for finishing of indoor wooden floors and wood in general. It is suitable for application on site or industrially. It is solvent free, easy to apply and gives a warm and rich effect to the wood in a sole coat. It does not contain drying compounds based on lead or cobalt for a major safety; the product has got a good drying time and guarantees a high protection against water and standard household products. Available neutral and in 30 colours. L’Olio 100% can be added with the Oil-Linker crosslinker to increase the chemical and mechanical resistance of the treated floor.
Technical data at 20°C – 60% R.U. Aspect Liquid Density 0,950 – 0,990 kg/l Spreading Within 15 – 20 minutes Touch dry 6 – 8 hours Polishing 24 hours Yield 35 – 40 m2 /litre Application temperature > 10 °C Storage 12 months in original packing at T >10 °C VOC content 35 g/l Tool cleaningi Immediately after use with Diluente RMD/91 or Green Cleaner Available packaging 1 l pot and 2,5 l. drum for the neutral version 1 l pot for the coloured version.